WEICON Anti-Seize

High-performance Assembly Pastes and Sprays

All kinds of influencing factors, such as moisture and friction, lead to damage due to corrosion, seizure, and wear on machines and installations. Extensive repair and maintenance work at considerable cost are the result.

Especially under critical conditions of application, such as:

  • High operation temperatures
  • High pressure loads
  • Outdoor weather conditions
  • Aggressive chemicals
  • The influence of other media

such consequences frequently occur.

The safe protection of work pieces and structures made of steel and other metals is thus absolutely necessary for the rational and economic operation of technical installations.

WEICON Anti-Seize assembly pastes are especially developed for these requirements. They are used as protecting and separating agents, as well as lubricants, for highly stressed parts, especially at high temperatures. Optimally balanced solids contents as well as selected additives permit a wide range of applications, especially in this area.

Conventional separating agents or lubricants such as mineral oils and greases often cannot provide sufficient lubrication and protection in difficult industrial environments.

Lubrication of the threaded spindles of a wire roll pressThe basic components in WEICON Anti-Seize are made of synthetic oils, which have a considerably lower sulphur content than products containing mineral oil. A residuefree vaporisation of the oil at temperatures between +200°C and +250°C is thus possible. This is particularly important in the case of stainless steels (e.g. for VA material) to prevent stress-corrosion cracking.

Due to the special formulation and the very fine grinding of the solids contained in WEICON Anti-Seize, irregularities in the surface being protected are completely filled – even to a layer thickness of only 12 µm. Only a perfectly sealed surface guarantees a reliable protection against corrosion. An additional sealing effect thus results for special applications, such as flange connections.

WEICON Anti-Seize provides protection against the following:

  • Corrosion – seizure - wear
  • Stick-slip phenomena
  • Oxidation and fretting corrosion
  • Electrolytic reactions (“cold welding”)

WEICON Anti-Seize is free of sulphurous additives and halogens, well-adherent and abrasion-proof, and resistant against hot, cold, and salt water. The extremely low friction coefficient also permits easy disassembly from machines and installations.

In addition, WEICON Anti-Seize assembly pastes are excellent lubricants for statically high-stressed parts and for slowly rotating installations, as long as corresponding relubrication intervals are observed.

With its dual function as a lubricant and corrosion protection agent, WEICON Anti-Seize thus becomes a rationalisation factor, both in terms of saving time and reducing costs.

WEICON Anti-Seize is used sparingly. At a layer thickness of 0,01 mm, 1 kg suffices to cover a surface area of approximately 45 m².

>> Brochure/ Technical data "Anti-Seize"
>> A-Z of Tribology Concepts

Three product variants are available for various areas of application.

WEICON Anti-Seize program

Anti-Seize "Standard Grade"

WEICON Anti-Seize Standard Grade consists of selected, finely ground, metallic solid lubricants and a high-quality synthetic oil mixture.

>> more

Anti-Seize "High-Tech"

Nowadays, increasingly high alloy steels and light and nonferrous metals are being used. When metalliferous assembly pastes are used, unwanted interactions between the paste and the material cannot be ruled out.

>> more

Copper Paste

Copper Paste is a protecting, separating and lubricating agent for highly stressed parts, used as assembly lubricant for threaded joints and sliding surfaces of all kinds. Even with high temperatures and corrosive atmospheres, fretting corrosion and seizing is prevented efficiently. The strongly-adhering paste consists of special additives and a combination of solid lubricants made of graphite and copper particles.

>> more

Important Note:
All specifications, recommendations and techncial data are based on laboratory tests under optimum conditions resp. on practical experience. They have been compiled most carefully. Nevertheless, a claim cannot be derived from them. We therefore recommend to carry out own tests before application. The user bears the only responsibility for non-appropriate or other than specified applications.

back top
WEICON Pen-System
NEW: Well-known WEICON products WEICONLOCK, CONTACT and ANTI-SEIZE in a new design. The newly developed WEICON Pen System can be handled like a pen and, thus, enables: easy application, clean processing and better dosing.
Choose your national or regional contact person for WEICON products!
Next event dates
2012, Nov 11 - 14
ADIPEC in Abu Dhabi (U.A.E.)
Visit WEICON in the U.A.Emirates.
2012, Nov 22 - 24
DENKMAL in Leipzig (Germany)
Visit WEICON at Halle , Stand F21.
2012, Nov 27 - 29
VALVE WORLD EXPO in Düsseldorf (Germany)
Visit WEICON at Hall 4, Stand 4G38.
2012, Nov 27 - 30
EUROMOLD in Frankfurt (Germany)
Visit WEICON at Hall 8.0, Stand B43.
2012, Nov 27 - 30
OSEA 2012 in Singapore
Visit WEICON in Singapore.
2012, Dec 5 - 8
Manufacturing / Machine Tool Indonesia in Jakarta
Visit WEICON in Indonesia.
2012, Dec 6 - 8
Bursa Metal Processing in Bursa
Visit WEICON in Bursa, Turkey.
Last Update: 2012-12-06   20:44 Copyright © 2006-12  
Home | Site Map | RSS Newsfeed