WEICON Anti-Stick

Sprayable epoxy resin system for wear protection with anti-stick properties

Product number: 10062940


Content: 0.5 kg (€225.90* / 1 kg)

Available, delivery time: 2-4 days


anti-stick effect | increased efficiency | sprayable

WEICON Anti-Stick is a liquid, grey 2-component epoxy resin system with mineral fillers for the protection of heavily stressed surfaces against aggressive chemicals and corrosion. It was specially developed for application with low-pressure equipment. In addition to the mineral fillers, Anti-Stick contains special additives that create an anti-stick effect and thus prevent flour, dust or suspended particles, for example, from sticking. The epoxy resin system has good chemical and thermal resistance up to +120 °C. It is free from solvents and cures with virtually no shrinkage. A coating with WEICON Anti-Stick, which gives surfaces a very smooth finish, increases the flow speed of liquids and thus increases the efficiency of pumps, pipes, valves, etc. by 5 % to 20 %. Anti-Stick is applied directly to the parts by sandblasting after thorough preparation of the substrate. The coating adheres very well to a wide variety of surfaces and is suitable for many different parts such as plain bearings, chutes, funnels and pipes as well as for coating castings and valves. The system can be used in mechanical and plant engineering, in apparatus engineering, in the paper industry, in the bulk goods industry, in exhaust gas systems, in mining, in open-cast mining, in chemical plants and in many other areas of industrial production. In any case, preliminary tests under practical conditions are recommended; especially if the parts are additionally exposed to increased temperature or mechanical stress. WEICON Anti-Stick is suitable on its own or in combination with one of the other WEICON plastic metal types for a system build-up as an anti-stick coating.

  • Processing Spatula
  • Instructions for use
  • Gloves
  • Resin & Hardener

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cleaner Spray S
powerful special cleaner
€10.81* (incl. VAT)

(€21.62* / 1 L)

Cleaner S
powerful special cleaner
€78.10* (incl. VAT)

(€15.62* / 1 L)

Glass Fibre Cloth Tape
laminating and repair fabrics
€4.31* (incl. VAT)

(€4.31* / 1 PCE)

Stirrer Stainless Steel
special mixer for process-safe mixing of liquid plastic metal types
€51.48* (incl. VAT)

(€51.48* / 1 PCE)

Processing Spatula
fibreglass-reinforced PA 6.6 - short version
€4.75* (incl. VAT)

(€4.75* / 1 PCE)

Pump Dispenser WPS 1500
€63.11* (incl. VAT)

(€63.11* / 1 PCE)

Processing Spatula
fibreglass-reinforced PA 6.6 - long version
€5.69* (incl. VAT)

(€5.69* / 1 PCE)

Surface Cleaner
for the pretreatment of bonding surfaces
€14.63* (incl. VAT)

(€36.58* / 1 L)

Surface Cleaner
for the pretreatment of bonding surfaces
€117.45* (incl. VAT)

(€23.49* / 1 L)

Mould Release Agent Liquid F 1000
for smooth surfaces
€33.99* (incl. VAT)

(€13.60* / 100 ml)

Mould Release Agent Wax P 500
for porous surfaces
€33.74* (incl. VAT)

(€22.49* / 100 g)

Cable Scissors No. 35
with 2-component handles for more safety incl. stripping and crimping function
€40.73* (incl. VAT)

(€40.73* / 1 PCE)

Processing Kit
universal set for processing plastic metal
€85.60* (incl. VAT)

(€85.60* / 1 PCE)

Repair Stick Multi-Purpose
repair putty non-corrosive with drinking water approval
€27.42* (incl. VAT)

(€23.84* / 100 g)

Brush 35 short, flat, Plastic Metal
short bristle brush for thick coatings
€4.75* (incl. VAT)

(€4.75* / 1 PCE)